Mounting Instructions - Axis T8125 Guia De Instalacion

Page 8
Caution!
• Read the Installation Guide and the Safety Information
before connecting the AXIS T8125 to its power source.
• Follow basic electricity safety measures when connecting the AXIS
T8125 to its power source.
• A voltage mismatch can cause equipment damage and may pose a
fire hazard. If the voltage indicated on the label is different from
the power outlet voltage, do not connect the AXIS T8125 to this
power outlet.
• Take extra care when connecting the power inlet terminals, so they
do not touch the chassis ground.

Mounting Instructions

The AXIS T8125 may be located on a desktop, or wall/bench mounted
using the mounting slots on the back of the AXIS T8125.
1. Mount two screws (not included) in the wall or shelf as shown in
Figure 1.
2. Align the AXIS T8125 mounting slots with the surface screws and
adjust the AXIS T8125 so it is securely attached to the wall/bench.
3 mm
(0.12")
Screw dimensions
Figure 1
AXIS T8125 AC 24 V Midspan 60 W
1.5 - 2 mm
(0.06" - 0.08")
5.8 - 7 mm
(0.23" - 0.27")
2 mm
(0.08")
91.7 mm
(3.61")
Screw placement