Examples Of Connections - Genius Audio GHD 3000 Manual Del Usuario

Input and power supply connections
CAUTION: All connections to power supply, input and output connectors must be
carried out only with amplifier off.
CD/DVD Player
Installation:
Congratulations, you have purchased a
Mp3
00:0000
032
It was developed in a modern laboratory and with the latest technology.
Thank you for choosing Genius Audio amplifiers for your vehicle.
This manual covers all features, operations and instructions to solve any doubt that may arise
You've had a very successful choice because it is an amplifier with a
during the installation. Please take some time to read it carefully in order to ensure the proper
technology and quality with a very high standard. It is a product that
installation and the use of all benefits this product can offer.
will provide long satisfaction, whether you are a person looking for a
For questions, please call +55 (507) 261.7256 / 6448 or visit www.geniuscaraudio.com.
high quality sound for daily use or a serious competitor, beam made
Examples of connections in the
power supply input:
the right choice with Genius Audio.
Note: Minimum current required: 170A
Key Recommendations
It is compulsory to install
protection fuses or circuit
You can find below some key recommendations to get the most out of your
breakers the closest possible
amplifier:
from batteries, and the final value
should be around 170A
1-) Read this instruction manual carefully before carrying out any connection.
ANY CONNECTION TO THE AMPLIFIER INPUT OR OUTPUT MUST BE
CARRIED OUT WHEN AMPLIFIER IS OFF;
2-) Check carefully the polarity of power supply wiring (battery's positive and
negative terminals) and loudspeakers, and the minimum speaker impedance;
3-) It is compulsory to install fuses to protect against overloading. The fuse or
circuit breaker must be installed as close as possible to the battery and sized
according to the amplifier;
4-) The gauge of power supply wiring is extremely important both to reach the
desired amplifier output and to the amplifier's safety. Use the wire gauge
Remoto
recommended in this manual (page 5). Using wire gauges below the specified
value will result in power loss and overheating of cables. It is important that the
Recommended wire gauge and fuse
power supply cables are the shortest possible.
Positive / negative power supply cable
5-) Amplifier must be installed in a firm and ventilated area.
Protection fuse or circuit breaker
6-) In order to avoid interferences, the signal cable (RCA) must be away from
Calculated considering a maximum length of 4 m.
the original wiring of vehicle or from any other power supply cable.
Caution:
Using wire gauges below the recommendation will result in power loss and overheating of wiring.
7-) The amplifier must be installed by a qualified professional.
Check polarity and never reverse power supply cables due to the risk of damage to the amplifier.
5
2
RCA Cable
Genius Audio product.
21mm² (4 AWG)
21mm² (4 AWG)
21mm² (4 AWG)
GHD 3000 - MONOBLOCK AMPLIFIER
Technical features
Examples of output connections
Caution: Observe the minimum impedance when installing, since impedances lower
than the recommended can damage the amplifier and void the warranty.

EXAMPLES OF CONNECTIONS

MODEL
NUMBER OF CHANNELS:
MAXIMUM OUTPUT POWER @ 13.8VDC - 1 OHM:
MAXIMUM OUTPUT POWER @ 13.8VDC - 2 OHMS:
MAXIMUM OUTPUT POWER @ 13.8VDC - 4 OHMS:
MAXIMUM OUTPUT POWER @ 13.8VDC - 8 OHMS:
MAXIMUM OUTPUT POWER @ 12.6VDC - 1 OHM:
MAXIMUM OUTPUT POWER @ 12.6VDC - 2 OHMS:
MAXIMUM OUTPUT POWER @ 12.6VDC - 4 OHMS:
MAXIMUM OUTPUT POWER @ 12.6VDC - 8 OHMS:
INPUT SENSITIVITY:
TOTAL HARMONIC DISTORTION (THD):
SIGNAL-TO-NOISE RATIO:
FREQUENCY RESPONSE:
CROSSOVER:
H.P.F (HIGH-PASS FILTER):
L.P.F (LOW-PASS FILTER):
BASS BOOST:
EFFICIENCY:
INPUT IMPEDANCE:
PROTECTION SYSTEM:
MINIMUM SUPPLY VOLTAGE:
MAXIMUM SUPPLY VOLTAGE:
IDLE CONSUMPTION:
170A
MAXIMUM MUSICAL CONSUMPTION @ 12.6VDC:
MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL (1 KHz) @ 12.6VDC:
DIMENSIONS (WxHxD):
WEIGHT:
www.geniuscaraudio.com
- 1 OHM MODE L
GHD 3000
1 OHM
1
3598W RMS
2446W RMS
1403W RMS
_
3000W RMS
2040W RMS
1170W RMS
_
250mV @ (-9.78 dBm)
0.3%
2 ohms 2 ohms
>95dB
10Hz to 15KHz
10Hz to 50Hz(-12dB/Octave) Variable
50Hz to 15KHz(-12dB/Octave) Variable
0 to 10dB (50Hz)
73%
18K OHMS
Short-Circuit to Output/High/Low supply voltage
9VDC
16VDC
1.70A
170A
340A
229 x 65 x 288mm (9" x 2.56" x 11.34")
3.11Kg ( 6.86lb)
4 ohms 4 ohms
2
3