Kiwi KMC 6940 Manual Del Uso página 42

15 minutes. Attention! Do not exceed the MAX marking!
To add flavour to the food, stock or a water/wine mixture for example may
also be used instead of water.
3. Insert the mixing bowl into the motor unit.
4. Place the steaming attachment into the mixing bowl. Make sure that the steaming
attachment fits correctly when you do this.
5. Loosely add the food you want. Make sure that some slots remain clear so that
steam can rise up. Insert the intermediate base into the steaming attachment if
necessary.
6. Place the lid on the steaming attachment. Make sure that it fits correctly as
otherwise more steam than you want may escape and the food will not be cooked
properly.
7. Switch on the motor unit by flipping the On / Off switch on the back of the motor
unit to the I position. A beep is heard and the device goes into standby mode. "stdy"
appears on the display.
START / STOP button to activate the device.
8. Press the
9. Set the preparation time you want and the temperature to 120 °C.
10. Press the START / STOP button. The device starts to operate.
11. The device stops automatically after the set preparation time has elapsed. Press the
START / STOP button to abort the preparation process prematurely or to deactivate
the device after the preparation time has elapsed.
12. To switch off the device, move the On / Off switch to position 0 and pull the mains
plug out of the plug socket.
13. Carefully remove the lid.
14. Twist the steaming attachment anticlockwise until the latch is released and carefully
lift it off.
15. Carefully remove the mixing bowl from the motor unit and pour away the hot
liquid.
Weighing

Make sure that the device is positioned stably on a flat work surface and the
suction feet stick to it properly so that the scale can display the most accurate
measurement results possible.
1. Switch on the motor unit by flipping the On / Off switch on the back of the motor
unit to the I position.
START / STOP button to activate the device.
2. Press the
3. Press the button to activate the weighing function.
The preset unit of measurement is grams. You can change the unit of
measurement by repeatedly pressing the
kg) – pounds (lb) – ounces (oz))
button (grams / kilograms (g /
42