Phoenix Gold SX2 400.2 Manual De Instrucciones página 8

SX2 600.1
MONOBLOCK POWER AMPLIFIER
Master / Slave Strapped
Do you have a monster subwoofer that you want to power?
No problem! You can strap two SX2 600.1 together to form
a single output for 1200 watts at 2 ohm.
SX2 600.1 Strapped Mode (multiple amplifiers / single subwoofer 2Ω minimum)
SX2 - 600.1 STRAPPED Mode (multiple amplifiers / single subwoofer 2Ω minimum)
RCA INPUT
R
LINE IN LINE OUT
R
LINE IN LINE OUT
WARNING:
Verify RCA is connected to (-) RCA Output
from MASTER and Left RCA Input on SLAVE
before powering ampli er.
WARNING:
Make this connection 2nd to avoid mistakes.
Verify RCA is connected to Right RCA Output
from MASTER and Left RCA Input on SLAVE
before powering ampli er.
Make this connection 2nd to avoid mistakes.
Adjustments for gain, crossover, EQ, and phase are only needed on Master ampli er, slave amp controls are disabled in Slave mode
Adjustments for gain, crossover, EQ, and phase are only needed on Master amplifier, slave amp controls are disabled in Slave mode
© 2017 Phoenix Gold • www.phoenixgold.com
MASTER AMP
AUTO
UN BAL OFF MASTER LP
36
20 70
13 90
10 120
0 180 0
HP PHASE 40Hz EQ
BAL ON SLAVE FLAT
Out Position to
WARNING:
Select Master
Connect JUMPER between negative
terminals before powering ampli er.
SLAVE AMP 1
We suggest making this connection
AUTO
UN BAL OFF MASTER LP
36
20 70
13 90
10 120 0 180 0
HP PHASE 40Hz EQ
BAL ON SLAVE FLAT
In Position to Select Slave
Proper Slave amplifier wiring:
Proper Slave ampli er wiring:
Utilizing this con guration will result in a very powerful ampli er but with that power comes responsibility.
Utilizing this configuration will result in a very powerful amplifier but with that power comes
Proper wiring is paramount so please read and understand these steps before proceeding.
responsibility. Proper wiring is paramount so please read and understand these steps before
proceeding.
Slave ampli er e ectively becomes negative channel in this system.
The Slave ampli er Positive output terminal is now the Negative speaker output in this system con guration.
Slave amplifier effectively becomes negative channel in this system. The Slave amplifier Positive
A jumper between the Master negative (marked -) terminal and the Slave negative (marked -) terminal must be connected
before powering ampli er.
output terminal is now the Negative speaker output in this system configuration. A jumper
RCA connection between Master and Slave ampli er must be correctly connected before powering ampli er.
between the Master negative (marked -) terminal and the Slave negative (marked -) terminal
Failure to correctly follow these steps can lead to damage to both ampli ers and is not covered under warranty.
must be connected before powering amplifier. RCA connection between Master and Slave
amplifier must be correctly connected before powering amplifier.
Warning: Failure to correctly follow these steps can damage both amplifiers and is not covered
under warranty.
125
PEAK
80 185
55 215
+6 40 240
8v 0.3v
dB
LP LEVEL SPEAKER
REMOTE
rst to avoid mistakes.
125
PEAK
80 185
55
215
+6 40 240
8v 0.3v
dB
LP LEVEL SPEAKER
REMOTE
Amplifier Owner's Manual
BASS
GND REM
-
RMD
GND REM
-
RMD
SX2 600.1
+
to Subwoofer
SX2 600.1
-
to Subwoofer