Maintenance And Storage; Service And Repair - Facom CD.12A Manual Original

7.

MAINTENANCE AND STORAGE

1. Over-torquing (110% of Max. torque range) could cause breakage.
2. Make sure the equipment is clean and don't place objects on the bench.
3. Do not use impact tools with this equipment.
4. Make sure all component parts are connected correctly before using it. Do not use accessories or adaptors.
that are not certificated.
5. Do not attempt to disassemble or repair it, it could be cause damage to machine.
6. Unauthorised personel should not operate this equipment.
7. Ensure loose clothing, hair or objects cannot become entangled in moving parts.
8. Solvents may cause damage to the surface or internals. Clean only with a damp cloth when required.
10. This product is not user serviceable. Please contact FACOM for service and repair.
8. GUARANTEE
These FACOM sensors are guaranteed for 24 months from the date of purchase against any defect or manufacturing fault. FACOM
accessories and wear parts, charger and batteries are covered by the legally enforced guarantee.
This guarantee does not cover the following cases: normal wear, non compliance of instructions of use and safety guidelines, non-
conventional or abusiveuse of the tool, tool overloading, lack of servicing or maintenance, intrusion of foreign bodies, tools which
have been disassembled or modified, or featuring traces of shock (dents, cracks or broken covers...), use with poor quality or non
compatible accessories.
To use the guarantee, provide: the tool with its serial number as well as the legible and unmarked original invoice designating the
product and its date of purchase. Detailed conditions of application of the guarantee: call your distributor.
9.

SERVICE AND REPAIR

This sensor is not user serviceable. For service or repair please contact FACOM customer service.
16
NU-CD.12A_0517.indd 16 19/05/2017 17:35:00