Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
SAFETY MEASURES
The scooter in its basic equipment is designed for
riding during daylight in areas meant for sport and
recreation. For roads with car traffic or for riding
in the dark, you need to provide your scooter with
safety features (lights, reflectors, etc.) in accordan-
ce with the regulations valid in your country. Pay
attention to traffic and general safety regulations and
use protective accessories (helmets, knee and elbow
pads, good shoes, etc.)
Before each ride, always check good function of
the brakes and the overall technical condition of
the scooter. Do not exceed the maximum loading
capacity of the scooter (as specified on the front side).
The scooter is designed for one rider only! Do not
overload the scooter, it is not intended for jumping
or acrobatic riding.
All the speed-limiting mechanisms (brake pads or
discs, rims, and tires etc.) can become warm when
used. For this reason, it is not recommend-
able to touch them before cooling off!
To park the scooter, use the kick-stand! Beware that its
loading capacity is approximately 15kg. Do not step on
the footboard when the scooter is parked.
RIDING
INSTRUCTIONS
When riding, always grip the handlebar with both
hands. While pushing off with one foot, place the
other foot on the footboard of the scooter. Regularly
exchange feet. In order to brake, press the brake
levers on the handlebars. Usually you would use the
right lever which controls the rear brake. The front
brake should only be used to supplement the stop-
ping power of the rear brake. Never squeeze the front
brake without also squeezing the rear brake with
equal or greater force.
WARNING: sudden violent braking may cause injury.
20
MAINTENANCE
Correct and regular maintenance increases safety
and lengthens the life span of your scooter. Regularly
inspect screw connections, quick releases, pressure
in tires and lubricate the moveable parts (wheels,
bearings, handlebars bearings, cables, brake parts
etc.). Make sure that no lubricant gets on the rims or
brake pads. Grease reduces their effect!
If this situation occurs, it is necessary to remove the
grease from all the parts, using a solvent and/or
degreaser.
Inspect the tires for cuts, nicks and deformities. Repla-
ce tires that show excessive wear and damage with an
equivalent tire.
Inspect the self-locking nuts. If they get loose freely,
exchange them with new ones.
Check the spokes for defects. Irregular strain or loo-
seness in spokes can cause their cracking or can make
the wheel wobble.
Keep your scooter clean, use soft cloth moistened
with water. It should be stored inside, on a dry and
shaded place. Do not expose the scooter to high
humidity or extreme temperatures over a long period
of time. Before the winter, prepare it against corrosion
and inflate the tires to its maximal value as specified
on the side of the tire. The producer does not cover
damage caused solely by neglected maintenance,
non-adequate adaptation, or inappropriate treatment
and storage.
The product complies with the corresponding EU
standards (ČSN EN 14619) and received quality and
safely certifications from a leading Czech testing
lab - Engineering Test Institute (Strojírenský zkušební
ústav, s.p.).
Producer: Intrea-Piko, s. r. o., Sasanková 2657/2, 106 00
Prague 10, Czech Republic
WARRANTY LIST
General regulations: The content, extend and duration of the warranty conforms to the valid legal code in
the respective country of the purchase of the scooter.
Warranty period: The buyer of the new Yedoo scooter (product) can apply the warranty during the period
of 24 months from the purchase. The warranty commences on the day of the sale to the end user and is
automatically extended when the product is taken into repair during warranty period.
Warranty application: The warranty must be filled out with the retailer, where the product was purchased
(see bellow). When applying the warranty, we recommend presenting the filled out sheet bellow, the rece-
ipt and a complete and cleaned product. The seller will give a written confirmation to the buyer regarding
the acceptance of the product into the warranty process.
Warranty conditions: The product must be assembled following the instructions of the manual. The
products shall only be used for the purposes, which it was designed for. The product must be stored and
maintained in the ways in accordance with the Instruction manual. The warranty does not cover damage
caused by common wear and tear is not covered by this warranty. The producer does not cover damage
caused by incorrect assembly or by use in contradiction with the Instruction manual.
Product model:
Serial number
of the frame:
Date of purchase:
Retailer:
Signature and stamp:
21
Tabla de contenido
