Akrapovic Slip-On Installation Instructions página 6

www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the scooter on a central stand. Make sure, that surface is solid and flat.
2.
Loosen the muffler's inlet clamp and unscrew the muffler's bracket clamp (F 01).
3. Undo the marked muffler's bracket clamp, unscrew the second muffler's bracket bolt and remove the stock muffler
off the scooter (F 02).
IMPORTANT: make sure not to damage or scratch any part of the scooter, during this procedure!
F 01
F 02
6 / 14