Energy Saving Tips; Using The Cooler - Mobicool M35 AC/DC Instrucciones De Uso

Operation
7.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
7.2

Using the cooler

NOTICE! Risk of damage
A
Ensure that the objects placed in the cooler are suitable for cool-
ing or (M35 AC/DC only) heating to the selected temperature.
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
Using M35 AC/DC
Place the cooler on a firm base.
Connect the 12 V connection cable (fig. 1 2, page 3) to the cigarette
lighter or a 12 V plug socket in the vehicle.
or ...
Connect the 230 V connection cable (fig. 1 3, page 3) to the 230 V AC
mains supply.
Switch the battery monitor (fig. 4 2, page 4) to "OFF".
Push the switch (fig. 3 3, page 4) on the operating panel to "COLD"
(Cooling) or "HOT" (Heating) to switch on the cooler.
The indicators on the control panel show you the operating mode:
Operating display
Green (fig. 3 1, page 4)
Red (fig. 3 2, page 4)
The cooler starts cooling/heating the interior.
12
M35 AC/DC, M40 AC/DC
Operating mode
Cooling
Warming