FLORABEST KH 4258 Manual De Instrucciones página 83

Connection
Connecting the appliance
IMPORTANT
This Programmable Water Timer may only be connected to a
drinking water outlet fi tted with a safety device that corresponds
to at least TYPE HD as per EN 1717 (non-return valve with
pipe ventilation).
► Appropriate adapters are commercially available.
NOTICE
► The appliance is equipped with a coupling nut
taps with a 33.3 mm thread (G1"). The adapter
connect the appliance to water taps with a 26.5 mm thread
(G ³/₄").
♦ For a 26,5 mm thread (G ³⁄₄"): Screw the adapter
water tap.
♦ Screw the coupling nut
resp. the adapter.
♦ Screw the coupling unit
the connect a hose to the coupling unit.
♦ Open the water tap.
Connecting the rain sensor
NOTICE
► Pay heed to the operating instructions for the rain sensor.
♦ Slide the two levers upwards to release the clamps
♦
Insert the cable ends of the connection cables into the clamps
then slide the two levers down to lock it again.
KH 4258
onto the thread of the water tap
6
onto the hose connection. You can
11
for water
6
is used to
10
onto the
10
.
7
7
GB
MT
81