Ec Certificate Of Conformity; On18.05.2018; 361929_0917_Ba_Sm_V4_06.09.2017_U_Enus_Druck.docx - AHT ATHEN Serie Manual De Instrucciones

AHT Cooling Systems GmbH

EC CERTIFICATE OF CONFORMITY

Manufacturer:
Authorized person for
technical documents.
Product designation:
Type designation:
The serial number, important technical data and approval marks are indicated on the power rating
plate of each device.
The sole responsibility for the issuance of this declaration of conformity is borne by the manufacturer.
The product described above complies with the provisions of the directives:
The conformity of the above-described product, with the essential requirements of the directive is
proven by the technical documentation and the full conformity with the following standards:
Applied harmonized standards
DIN EN 60335-1 (VDE 0700-1):2012-10; EN 60335-1:2012
DIN EN 60335-1 Ber.1 (VDE 0700-1 Ber.1):2014-04; EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
DIN EN 60335-2-89 (VDE 0700-89):2010-12; EN 60335-2-89:2010
DIN EN 62233 (VDE 0700-366):2008-11; EN 62233:2008
DIN EN 62233 Ber.1 (VDE 0700-366 Ber.1):2009-04; EN 62233 Ber.1:2008
DIN EN ISO 12100:2011-03; EN ISO 12100:2010
DIN EN 61000-3-2 (VDE 0838-2):2015-03; EN 61000-3-2:2014
DIN EN 61000-3-3 (VDE 0838-3):2014-03; EN 61000-3-3:2013
DIN EN 55014-1 (VDE 0875-14-1):2012-05; EN 55014-1:2006 + A1:2009 + A2:2011
DIN EN 55014-2 (VDE 0875-14-2):2016-01; EN 55014-2:2015
Other standards applied in the design and construction of the products:
EN ISO 23953-1:2015
EN ISO 23953-2:2015
EN 60079-15:2010 (device type R-290)
In the case of a technical change to the product described above that is not approved by us, this declaration becomes invalid.
Signed for and on behalf of the manufacturer:
Rottenmann, 22.12.2017

on18.05.2018 12:37

AHT Cooling Systems GmbH
Werksgasse 57
A-8786 Rottenmann, Austria
Dipl.-Ing. Reinhold Resch
Werksgasse 57
A-8786 Rottenmann, Austria
Commercial refrigerator/freezer
According to device models overview at the start of this operating manual
(SNo.361929).
Machinery Directive 2006/42/EC of May 17, 2006
EMC Directive 2014/30/EU of February 26, 2014
RoHS Directive 2011/65/EU of June 08, 2011

361929_0917_BA_SM_V4_06.09.2017_U_enUS_DRUCK.docx

_________________________________________
Dipl.-Ing. Reinhold Resch
Head of Development Dept.
Authorized representative for technical documentation
Page 55