Singer SteamLogic Plus 7070 Manual De Instrucciones página 6

IMPORTANT: Before you start
ironing, read the garment labels
and follow manufacturer's ironing
instructions that are often shown
using symbols similar to the
following:
(If you are not sure what the fabric is
made of, begin ironing at Low (•) Setting.)
IRONING
1. Press the Temperature Set Button to turn on appliance
and select your desired temperature.
2. Depending on which temperature setting you have
selected, the corresponding Indicator Light will blink.
When the iron is ready to use, the Light will stop
blinking and stay on.
3. Steam ironing is available for High & MAX
temperature settings. You can move the Steam
Selector up to
steam ironing. Move the Steam Selector down
to position to stop generating steam.
4. Adjust the temperature setting by pressing the Temperature Set Button.
5. After use, press and hold the Temperature Set Button for 5 seconds to turn the
appliance off.
6. After every use, follow the instructions in this manual to Drain the Water Tank. It is
recommended to drain the Water Tank after each use.
6 – ENGLISH
Using Your SteamLogic Plus
Steam Iron
position to generate steam for
Temperature Control Setting
• Acetate • Polyester
• Elastine • Silk
• Polymide • Triacetate
• Viscose
• Wool
• Cotton
• Linen