Unpacking Your Ice Maker; Connecting Your Ice Maker - Hkoenig KB15 Manual De Utilización

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging. Check if ice basket and ice scoop inside.
If any parts are missing, please contact our customer service.
2. Remove the tapes for fixing ice shovel, ice basket & ice scoop. Clean the tank & ice
basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and other sources
of heat (i.e.: stove, furnace, radiator). Maker sure that there is at least 10cm gap
between the back & LH/RH sides with the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.
WARNING: fill with potable water only. Only use drinking water.

CONNECTING YOUR ICE MAKER

DANGER
* Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance
is equipped with a grounding plug which mates with standard grounding wall outlets to
minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Do not
under any circumstances, damage the grounding means of the plug under any
circumstances. Any questions concerning power and/or grounding should be directed
toward a certified electrician.
3. This appliance requires a standard 220-240Volt, 50Hz electrical outlet with good
grounding means.