Setting Up Your Boombox; Using The Ac Power Adapter; Installing The Batteries - Insignia NS-B3112 Guia Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Insignia NS-B3112 Boombox with iPod® Dock

Setting up your boombox

Using the AC power adapter

To use the AC power adapter:
1 Make sure that your local AC power source matches the voltage
shown on the plate located on the AC power adapter. If it does not,
consult your dealer or service center.
2 Insert the small connector at the end of the AC power adapter
cable into the DC IN jack on the back of your boombox.
3 Plug the AC power adapter into a wall power outlet.

Installing the batteries

To install the batteries:
1 Turn your boombox over, then open and remove the door to the
battery compartment.
2 Insert eight (8) "C" size batteries into the battery compartment.
Make sure that you match the + and – symbols on the batteries
with the + and – symbols in the battery compartment.
Caution
To protect your boombox during thunderstorms, unplug the
AC power adapter from the AC power outlet.
Note
Only use the supplied AC power adapter, which has the
following specifications: DC=12V 2A
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically bypassed when the AC
power adapter is used.
www.insignia-products.com
11
Tabla de contenido
loading

Tabla de contenido