Powering On The Device - i.safe MOBILE IS725.2 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
If this is not done immediately, unsaved data may be lost . If the device does not charge for a
long time, it will shut itself off .
INSTALLATION OF THE NANO SIM CARD
The device features two nano SIM card slots . These are located in the battery compartment
under the battery .
WARNING
Do only change the SIM card when the device is switched off . Do not try to insert or remove
the SIM card when any external power supply is connected, otherwise the SIM card may be
damaged .
INSTALLATION OF THE microSD CARD
The device has another slot for a micro SD card (up to 128 GB) . This is located in the battery
compartment under the battery .
If you want to remove the micro SD card, make sure the card is not being used by the device by
<Settings>
selecting
WARNING
Do only change the microSD card when the device is switched off . Do not try to insert or remove
the microSD card when any external power supply is connected, otherwise the microSD card
may be damage .

POWERING ON THE DEVICE

Press the [ON/OFF Key] until the screen lights up . Depending on the security settings of your
SIM card, the device may ask you for your personal identifi cation number (PIN) before starting
up . The fi rst time you power on your device, you may be prompted to assign a language, date
and time zone and enter your personal information . You will also be asked to sign in or set up
your Google™ account . You can do this later but please note that some of the functions of the
device like the Google Play™ Store depend on a Google account .
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1
POWER KEY: Switching on the device . Long press to power ON/OFF the device .
Short press to power ON/OFF the standby mode .
2
CAMERA: Front camera .
3
SOS BUTTON: If a corresponding LWP App is installed, pressing and holding the SOS
button will send an emergency call to a previously stored emergency number .
4
SOFTWARE CHANNEL SELECTOR: E .g . to set a PTT channel in a appropriate app .
5
ISM INTERFACE: For approved accessories, see www.isafe-mobile.com .
6
CAMERA KEY
7
CURRENT APPLICATION
8
:
HOME KEY
Press and hold to return to the main screen .
<Storage>
<SD card eject „symbol">
:
Shows all open applications .
<OK>
EN
7
Tabla de contenido
loading

Tabla de contenido