Schumacher Electric schulink+ SA1345 Manual Del Usuario página 4

REGISTERING A MONITOR
When using the App for the first time with a new monitor, you must register your
monitor to the App.
1. Open the App on your mobile device.
2. Press the
3. Tap the three short horizontal bars
4. Choose ADD MONITOR.
5. Enter the Monitor ID number and password (SC30xxxxx-yy) located on the
Monitor ID card included with the unit. This information is also found on the
back of the monitor.
6. Swipe screens and follow directions to finish registration.
5. SETTING UP THE BATTERY MONITOR
The ring connectors permanently attach to the battery, providing easy access to quickly
connect the monitor to your battery. This application is appropriate for motorcycles,
lawn tractors, ATVs and snowmobiles.
1. To permanently attach to a battery, loosen and remove each nut from the bolt
at the battery terminal.
IMPORTANT: Loss of vehicle settings can occur. Check vehicle owners manual for
specific information.
2. Connect the red POSITIVE connector ring to the POSITIVE battery terminal.
3. Connect the black NEGATIVE connector ring to the NEGATIVE battery terminal.
4. Replace and tighten the nuts to secure.
5. Connect the cable to the end of the monitor output cord. Take care to keep the
wires and plug away from metal and moving parts.
6. The monitor can be secured to the vehicle with zip ties (included).
Home icon.
to bring up a menu.
• 4 •