Dtmf Remote Control Function - Pihernz RANGE EXTENDER ATX-3000A Manual De Instrucciones

Step 2:
Press [#] [#] [4] (mode) + [1] [2] [3] [4] (new password).

7.7.- DTMF REMOTE CONTROL FUNCTION:

Table 4
DTMF code
##0
##1 + 8888
##2 + 8888
##3 + 8888 + 1234
##4 + 1234
##51 + n
##52 + n
##53 + n
##54 + n
##59 + n
##61 + n
##62 (repeat
message testing).
##71
##81
##82
##83
##84
##85
##86
Test DTMF, display DTMF signal (see table 3).
Enable record function (standby mode) *Factory password 8888.
Disable record function (standby mode).
Change the password, step 1.
Change the password, step 2.
Delay time after release the [PTT], n = 1-9 (unit 0.1 second).
Delay time after playback, n = 1-9 (unit 0.1 second).
Record level, n= 1-9, default value = 5.
Playback level, n= 1-9, default value = 5.
n = 1 for enable the "Roger beep", n = 0 for disable the "Roger beep".
n = 0, disable repeat message.
n = 1, repeat message once every 15 minutes.
n = 2, repeat message once every 30 minutes.
n = 3, repeat message once every 45 minutes.
n = 4, repeat message once every 60 minutes.
(* Status blue led blink once within 10 seconds).
Repeat message twice within 20 seconds (for mode ##611).
Repeat message twice within 40 seconds (for mode ##612).
Repeat message twice within 60 seconds (for mode ##613).
Repeat message twice within 80 seconds (for mode ##614).
(*Status blue led blink once within 10 seconds).
Replay last message.
Record message 1, maximum record time = 60 seconds.
(After enter ##81, the voice will record to message 1).
Playback message 1.
Record message 2, maximum record time = 60 seconds.
(After enter ##83, the voice will record to message 2).
Playback message 2.
Record message 3, maximum record time = 60 seconds.
(After enter ##85, the voice will record to message 3).
Playback message 3.
Function
English - 12 -
RANGE EXTENDER