Notes; Disposing Of This Product; Features - NEC NP04Wi Manual Del Usuario

Notes

• Use a flat and hard screen with a screen size of 100 inches or less.
• Some screen surfaces can be scratched by the stylus pen tip. Before using the stylus pen, test it in
an inconspicuous part of the screen to be sure the pen tip will not damage the screen surface.
• Do not use the stylus pen in the below mentioned areas.
It may cause of malfunction of the stylus pen.
- In the area direct sunlight strikes the screen surface and the camera unit.
- In the area light of halogen or filament lamps directly strikes the screen surface and the camera
unit.
- In the case, materials reflects light is used within the stylus pen operation area. (ex. screen
frame)
• Do not use the stylus pen in the below mentioned environment. It may cause of malfunction of the
stylus pen.
- When the infrared remote is used.
• The guaranteed operation temperature range for the function of the stylus pen is 5° to 40°C (41° to
104°F).
• When mounting or removing the camera unit, do not remove any screws other than those speci-
fied.

Disposing of this product

• When disposing of this product, contact your store of purchase or local government for instruc-
tions.

Features

• Interactive electronic white board function
By combination with drawing software, the white board or wall can be used as your interactive white
board, and you can take handwritten notes or draw pictures on the screen with the supplied stylus
pen.
Moreover, by combination with the Touch Module (NP01TM sold saparately), it enables to draw on
the white board or wall by your finger.
Supported projectors:
- UM330X, UM280X, UM330W, UM280W
- UM351W, UM301W, UM361X, UM301X
- U321H
* Do not fix on this product other than the above listed supported projectors and the exclusive
holder.
• One or more people can take notes or draw pictures with stylus pens at the same time
Two stylus pens come standard with the product. The stylus pen is also available as an option
(NP02Pi).
Up to 10 stylus pens can be used at the same time on the product.
However, this number will vary depending on drawing software you use.
For using drawing software, refer to the user manual included with the drawing software.
• Auto Calibration function
Position adjustment is easily done thanks to the auto calibration function.
ENG-5