Safety Warnings; Electrical Safety - Ferm PSM1024 Traducción Del Manual Original

Orbital Sander 520W
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.

SAFETY WARNINGS

1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
5
Wear safety goggles. Wear hearing
protection.
A
Wear a dust mask.
7
Double insulated.
Do not dispose of the product in
unsuitable containers.
4
ADDITIONAL SAFETY WARNINGS
FOR FINISHING SANDERS
2
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust extraction during use.
● Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
● Do not use the machine for sanding
magnesium workpieces.
● Wear safety goggles, hearing protection and
if necessary other protective means, such as
safety gloves, safety shoes, etc.
● Be very careful when sanding painted surfaces.
● Before use, remove all nails and other metal
objects from the workpiece.
● Make sure that the workpiece is properly
supported or fixed.
● Only use sanding paper that is suitable for use
with the machine.
● Only use sanding paper with the correct
dimensions. Make sure that the sanding paper
is properly mounted.
● Inspect the sanding paper before each use.
Do not use sanding paper that is worn
because of prolonged use.
● Never put the machine down on a table or
a workbench before it has been switched off.

ELECTRICAL SAFETY

3
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
● Do not use the machine if the mains cable or
the mains plug is damaged.
● Only use extension cables that are suitable for
the power rating of the machine with
a minimum thickness of 1.5 mm
a extension cable reel, always fully unroll the
cable.
. If you use
2