Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ANGLE POLISHER 1400W - 180MM
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2-3.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
Contents
Introduction
Any other use other than polishing and light
sanding is strictly forbidden.
1. MACHINE dATA
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
4
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Features
Fig. 1
1. On/off switch
2. Speed control
3. U-shaped handle
4. Pad holder
5. Spindle lock
6. Switch lock
2. SAFETy INSTRuCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the machine in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
230-240 V~
Immediately unplug the plug from the
50 Hz
mains electricity in the case that the cord
1400 W
gets damaged and during maintenance.
1000-3300/min
180 mm
Use spindle lock only in stand still mode.
M 14
3.3 kg
86+3 dB(A)
97+3 dB(A)
3.51+1.5 m/s
Keep bystanders away.
2
Tabla de contenido
