Product Description And Specifications - Bosch GHG 16-50 Professional Manual Original

If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for bending and welding plastic,
stripping coats of paint and heating shrink tubing. It is also
suitable for soldering and tinning, melting adhesive bonding
and thawing water pipes.
Technical Data
Heat gun
Article number
Rated power input
Airflow
Temperature at the nozzle outlet
Temperature measurement accuracy
Weight according to EPTA-Procedure 01:2014
Protection class
A) The amount of air increases when the temperature rises from 50 °C to 300 °C. The speed of the fan is identical at both power settings.
B) At an ambient temperature of approx. 20 °C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K:
h
2 2
a ≤2.5 m/s , K=1.5 m/s .
h
Operation
Starting operation
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the
rating plate of the power tool.
Creation of Smoke During Initial Use
A coating protects the metal surfaces from corrosion ex-
works. This protective layer evaporates during initial use.
Switching On
Slide the on/off switch (2) upwards.
Bosch Power Tools
B)
The power tool is intended to be operated by hand, under
supervision.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Storage surface
(2) On/off switch and power settings
(3) Nozzle
(4) Heat shield, removable
A)
(5) Surface nozzle
A)
(6) Glass protection nozzle
A)
(7) Angle nozzle
A)
(8) Reflector nozzle
A)
(9) Reducing nozzle
A)
(10) Heat shrink plastic tube
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GHG 16-50
3 601 BA6 0..
W 1600
l/min 240/450
°C 300/500
±10 %
kg 0.52
Switching Off
Slide the on/off switch (2) downwards into the 0 position.
GHG 18-60: After working at high temperatures for a
u
prolonged period, let the power tool cool down by
briefly running it at the 50 °C power setting before
switching it off.
Selecting the power setting (GHG 16-50)
You can choose between different power settings using the
on/off switch (2):
GHG 16-50
Power setting °C
300
500
Selecting the power setting (GHG 18-60)
You can choose between different power settings using the
on/off switch (2):
English | 7
GHG 18-60
3 601 BA6 1..
1800
A) A)
200 /350 /500
A) A)
50 /300 /600
±10 %
0.52
/Ⅱ /Ⅱ
l/min
240
450
1 609 92A 4UB | (19.03.2019)