REED PLASOH Manual Del Operador página 2

PLAS0H Models
Figure 1
CAPACITY
• The PLAS0H can cut and bevel plastic pipe up to 12" (335 mm) diameter.
• Take care to check specific model numbers for PVC or PE pipe.
• Blades for PE and PVC can be switched so that one cutter can work for
either type of pipe.
IMPORTANT NOTE
T he cutter is equipped with a carbide cut-off tool. For this reason, cutter must
be rotated only in the direction indicated by the arrow. The arrow is marked
on the cutter frame. (Figure 3). If cutter is turned backward, carbide tip may be
broken.
Figure 4
NOMINAL PIPE SIZE
4" (100 mm)
6" (160 mm)
8" (240 mm)
Arrow on frame
2
PLAS0H
Figure 3
PLAS0HPE
PLAS0H MODELS
PIVOT LINK/ HOLES
Short/Inner holes
Short/Outer holes
Long/one inner hole, one outer hole
Figure 2