Camera Focus - Dedicated Micros 1000 Manual De Instalación

6. Camera Focus

Note: The camera focus is factory preset
and should require no adjustment.
1
If focus of the camera is needed, access to the
series 1000 fixed dome camera is made possible
by removing the hemisphere fixing ring, by first
unscrewing the 4 x M4 Torx Head screws.
Remove hemisphere fixing ring and hemisphere,
taking care not to dislodge the seal.
2
Focus of the camera is made by simply rotating
the camera lens, until the best picture quality is
achieved as shown opposite.
When replacing the hemisphere ensure the seal
is seated properly, making the dome fully water
tight.
1000 Installation Manual Page. 7