Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting with a Bluetooth device
In order to use your RTE 2 headphones with a Bluetooth device, you must first pair the devices
to create a wireless connection. The RTE 2 headphones will automatically connect to the
Bluetooth device as long as the headphones have not been paired to another device.
1.
With the headphones powered off, press and hold the Multi-function button for 5 second.
A repeating two note audible sound will play and the indicator light will flash blue. The
headphones are now in pairing mode.
Note: While you are holding down the Multi-function button, the indicator will (1) flash
blue once, (2) flash red for three seconds, then (3) repeatedly flash blue.
2.
In the settings of your Bluetooth device, set it to "discover" available devices.
3.
From the Bluetooth device list, select the "Samson RTE 2" device.
4.
If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some
devices may also ask you to accept the connection.
5.
When the connection is established, the indicator light will flash a blue light two times
every 5 seconds.
Note: To clear the pairing settings from the headset, turn off the headset. Then press and hold
the Multi-function button simultaneously with the down "–" volume button for 8 seconds. The
indicator light will flash red and blue three times to indicate the pairing has been cleared.
6
English
Tabla de contenido
