Resetting The Scale To Zero; Using The Tare Function (Tare); Switching Off The Scale; Resetting The Scale - ADE KE 1912 Instrucciones De Operación

Resetting the scale

‚ The capacity of the bowl is approx. 2 litres.
‚ You can also weigh using a different container (tub, plate, etc.). In
doing so, the procedure is the same.

Resetting the scale to zero

If the display still shows values even if the weighing surface is empty (e.g. if the scale is
not optimally positioned or a TARE value is still displayed; see next section), you must
set the scale to zero.
− Briefly press On | Off zero once.

Using the tare function (TARE)

This function is practical when baking, for example, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press On | Off zero to reset the scale to "0".
2. Add the new item or substance. The weight of the added item or substance is
shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process
can be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scale

− Hold down On | Off zero until the display turns off.
The scale will automatically switch off if it is not used for approx.
60 seconds.
Resetting the scale
Reset the scale to its default settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Reinsert the batteries. Pay attention to the correct polarity of the batteries (+/-).
After switching on the scale, you can start weighing as usual.
18
KE 1912 kitchen scale