Idiomas disponibles
Idiomas disponibles
Operation
7.2
Front panel buttons and LEDs
Power LED
HDD LED
Alarm Out LED
Camera buttons (1 to 4)
Play/Clip button
Panic button
PTZ/Zoom button
Menu button
Enter/Pause button
Up, Down, Left, Right
Arrow buttons
7.3
Playback commands
Camera buttons (1 to 4)
Up, Down, Left, Right
Arrow buttons
Pause button
Play button
Zoom button
12
Siemens Building Technologies
Fire Safety & Security Products
The Power LED is lit when the unit is On.
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
The Alarm LED is lit when alarm output or internal buzzer is activated.
Pressing the individual camera buttons will cause the selected camera to display full screen,
and pressing the button again changes the display format to the quad (2x2) mode. Buttons 1
to 4 are also used to enter passwords.
In the PTZ mode, pressing the button 1 zooms in the screen and the button 2 zooms out the
screen, and pressing the button 3 focuses near and button 4 focuses far.
Pressing the Play/Clip button enters the playback mode, and pressing the button again exits
the playback mode. When entering the playback mode, video is paused. Pressing the
button plays back video at regular speed. The screen displays
Pause mode and the screen displays
also used to load a Preset View in the PTZ mode.
Pressing and holding the Play/Clip button for three seconds or longer allows you to copy video
clips.
Pressing the Panic button starts panic recoding of all camera channels, and displays
the screen. Pressing the button again will stop panic recording.
In the live monitoring mode, pressing the PTZ/Zoom button enters the PTZ mode, and
pressing the button again exits the PTZ mode and enters the zoom mode. When in the zoom
mode, pressing the button again exits the zoom mode.
When in the PTZ mode, pressing the arrow buttons or Menu button allows you to control
properly configured cameras.
When in the zoom mode, a rectangle displays on the screen. A rectangle shows the area that
will be enlarged. You can move the rectangle around using the arrow buttons. Pressing the
(Enter) button in enlarges the area in rectangle.
Pressing the Menu button enters the Setup screen. You will need to enter the authorized user
and password to access Setup. Pressing the button also closes the current menu or setup
dialog box. In the Playback mode, pressing the button displays the Search menu.
Pressing and holding the button for three seconds or longer displays live channels
sequentially.
When in the setup mode, pressing the
entry that you have made.
In the live monitoring mode, pressing the button freezes the current screen and the screen
displays
icon. When in the playback mode, pressing the button pauses playing video.
These buttons are used to navigate through menus and GUI.
The Up and Down arrow buttons are also used to change numbers by highlighting a number in
the menu and by increasing or decreasing the number's value.
These buttons are also used to control Pan and Tilt when in the PTZ mode. In the playback
mode, pressing the
button plays video backward at high speed. Pressing the button again
toggles the playback speed from
and
respectively. While playing video, pressing the
high speed. Pressing the button again toggles the playback speed from ,
, and the screen displays ,
mode, pressing the
button moves to the next image and pressing the
the previous image.
Pressing the individual camera buttons will cause the selected camera to display full screen.
Pressing the
button plays video backward at high speed. Pressing the button again toggles
the playback speed from
,
high speed. Pressing the button again toggles the playback speed from ,
. When in the pause mode, pressing the
pressing the
button moves to the previous image.
Pressing the
button pauses playing video.
Pressing the Play button enters the playback mode, and pressing the button again exits the
playback mode. When entering the playback mode, video is paused. Pressing the
plays back video at regular speed. The screen displays
and the screen displays
when the DVR is playing back video.
Pressing the Zoom button zooms in the current image in double on the screen.
when the DVR is playing back video. The button is
button selects a highlighted item or completes an
,
and
, and the screen displays
button plays video forward at
,
and
respectively. When in the pause
and
. Pressing the
button plays video forward at
button moves to the next image and
when the DVR is in the Pause mode
arrow
when the DVR is in the
on
,
,
and
button moves to
,
and
button
EN
01.2009
Capítulos
