Warranty; Warnings; Environmental Notes - Spin COUNTRY CLIMA Manual De Uso

1. Warranty

The device is covered by a 12-months warranty starting from the date of delivery.
The mentioned warranty does not cover the compressor and the vacuum pump, if the Manufacturer assesses that
they were used without lubricant or with wrong lubricant.

2. Warnings

This symbol is used to indicate that a no compliance or a misunderstanding of the instructions may
cause injuries to people.
In addition to the warnings included in the present manual, it is also recommended to follow the
instructions here-below:

Follow the station during the movement and block it with brake it during the use;

Do not expose the station at room temperature > 45 °C outdoor use must be strictly limited to the time
necessary to carry out all the operations;

Do not use the device in presence of potentially explosive atmosphere;

Use the station in rain-protected places.

3. Environmental Notes

NOISE The Machine presents a Lep,d value of less than 70 dB(A).
If positioned in areas with a noise value of more than 80 dB(A), the employer must form and
inform the operator of the risks from exposure to the noise and must take the necessary
precautions according to the authorized doctor.
PACKAGING Do not throw away the packaging, separate it according to the type of material (eg. cardboard,
wood, plastic material, etc.) and dispose of them in conformity with the local and national laws in
force.
OUT OF ORDER At the end of the Machine's working life:



At the end of the Machine's working life, the parts, separated by the type of material, had to be
DISPOSAL
disposed in conformity with the local and national laws in force.
For the electric and electronic devices, called Electrics and electronics Equipments (WEEE),
according with EC Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, the Manufacturer
specifies:




REMOVING OF BATTERIES AND ACCUMULATORS WASTE
In conformity with the European Directive 2006/66/CE, the removing instructions of the battery,
lithium type CR2032 contained in the station, are provided below:




14/04/2016
Deactivate the Machine, by disconnecting it from the electric power supply and cutting the
supply line cable;
Disassemble the Electronic Panel and the related electronic board-card;
Disassemble the components, separating the various types.
NOT dispose of the equipment as municipal waste and separate collection
is mandatory;
Ask the retailer about collection points authorised for regular disposal;
Stick to the standards for correct waste management, to prevent potential
effects on the environment and human health;
The onside symbol indicates that separate collection of waste electrical and
electronic equipment is mandatory for scrapping.
Place the switch of the station in the off position
Disconnect the station from the power supply
Remove the back panel by unscrewing the screws
Remove the round battery from the electronic board
Vers. 2 28