Prilux Energy TECH RGB RF Instrucciones De Montaje página 3

Idiomas disponibles

Idiomas disponibles

Energy TECH
RGB RF
ENERGY TECH RGB RF / 20W
BEFORE BEGINNING INSTALLATION OF THIS PRODUCT,
PLEASE READ THE INSTRUCTIONS CAREFULLY AND
STORE THEM IN A SAFE PLACE.
INSTALLATION MUST BE CARRIED OUT BY QUALIFIED
PERSONNEL.
IMPROPER HANDLING OF THE COMPONENTS OR OF
THE LUMINAIRE ITSELF MAY DAMAGE THE CORRECT
OPERATION OF THIS PRODUCT AND WILL VOID THE
MANUFACTURER'S WARRANTY.
THE MANUFACTURER'S WARRANTY IS VOID: IF
INSTALLATION IS NOT CARRIED OUT IN ACCORDANCE
WITH THE REBT 2002.
OBSERVE
THE
HANDLING COMPONENTS SENSITIVE TO
ELECTROSTATIC DISCHARGE (LED).
1/2
agosto 2020
149
42
AVISO
PRECAUTIONS
FOR
ENERGY TECH RGB RF / 50W
ELECTRICAL CHARACTERISTICS
Voltage
DEGREE OF PROTECTION
Electrical isolation
Degree of waterlightness
PHYSICAL CHARACTERISTICS
Weight (kg)
PRECAUTIONS:
• This product is for outdoor use.
• Do not handle the product while it is in operation. When handling, switch
off the power supply.
• Do not immerse this product in water or handle it with wet hands.
• If the product is damaged, replace it with a new one.
• In the event of breakage or damage to the protective glass, it must be
replaced immediately.
• Do not touch the body of the protector when it is hot.
• Carefully follow the instructions in this manual.
• If in doubt, consult a qualified technician.
• The flexible cable or outer cord of this luminaire cannot be replaced; if
damaged, the luminaire must be destroyed.
• The connection block is not included. The installation may require the
intervention of a qualified person.
• The luminaire should be positioned so that a long look at the luminaire at a
distance closer to x 1m is not expected.
ASSEMBLY INSTRUCTIONS:
1. Turn off the power.
2. Remove the bracket from the luminaire.
3. Attach the bracket to the mounting surface with the appropriate screws.
4. Attach the luminaire to the bracket with its accessories.
5. Connect the line (L), neutral (N) and ground cables (
the power cord.
6. Adjust the position of the luminaire and tighten the screws.
7. Turn on the power.
CHARACTERISTICS:
• Control battery not included.
• Maximum radius of control range 40m.
217
45
100-240V ac
IP65
20W
50W
) correctly to
0,74
1,72
loading