asalvo baby 17352 Manual De Instrucciones página 12

3. INSTALLING THE PADDING BEDSPRING (120 X 60 X 2 CM):
- Fold the mattress and place it in the bottom of the cradle, with the printed side
looking up.
- Adhesive tapes fastening padded mattress should be introduced by the
openings in the background fabric and then fasten them to the bottom to
the mattress remains immobilized.
4. ELEVATOR INSTALLATION:
- The lift must be attached to the cradle with the help of the zipper.
- Enter the 4 tubes of metal in fabric loops it is at the bottom of the elevator.
Attach tubes 2 by 2.
- Surround tubes with straps adhesive is in the center controller high.
- The pillow-top mattress should be placed so that it is blocked by the
straps at the bottom corners.
EN
5. BENDING THE CRADLE:
- Remove the mattress padding. Remove the height adjustment if necessary.
- Lift the bottom of the cradle pulling the center. Take this central part
from cradle to an intermediate height to the sides of the cot.
- To fold each of the upper side pipes, lift slightly
and then press the lock button located under the handle (see Figure 2)
and fold the crossbar.
- Fold the cot and put the mattress around to keep it folded.
6. WHEEL LOCK:
To lock the wheels, press the brake at each one.
To unlock, lift the brakes.
surveillance.
7. TOY BAR INSTALLATION:
is suspended above the cot as shown in Figure 11.
12