Solter OPTIMATIC Serie Manual De Instrucciones página 9

Functions.
Some filters allow it to operate in two modes of operation: welding or grinding.
Grinding: Used for material grinding applications. In this mode, the dimming function is off. This allows a clear
vision with the assurance that the mask will protect the face from any possible damage from projections.
Grind mode is intended for grinding work, not welding.
Before re-welding be sure to return the knob to the welding position.
Welding: Used for most welding applications. In this mode, the dimming function is on. The moment an arc is
optically perceived, select the appropriate level of protection, delay time, and sensitivity level.
TABLE FOR FILTERS ACCORDING TO APPLICATION
CHOOSING HARNESS
Harness height (Position W)
Adjust the harness to the appropriate depth on the head to ensure correct and stable balance.
Tighten the harness (Position Y)
Press the adjustment button on the back of the harness and turn it to the right or left to the appropriate
position.
Adjust Distance (Z Position)
Adjust the distance between the face and the lens by loosening the two outer nuts equally and press inward to
release it from the adjustment slots.
9