A29 Specifications - Arcam FMJ A29 Manual De Instrucciones

A29
specifications
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz
Single channel, 4Ω, at 1kHz
Harmonic distortion, 80% power, 8Ω at 1kHz
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz
Input impedance
Frequency response (ref. RIAA curve)
Signal/Noise ratio (Awtd) 50W, ref. 5mV input
Overload margin, ref. 5mV at 1kHz
Inputs:
Nominal sensitivity
Input impedance
Maximum input
Frequency response
Signal/noise ratio (Awtd) 50W, ref. 1V input
Preamplifier output
Nominal output level
Output impedance
Headphone output
Maximum output level into 600Ω
Output impedance
Load range
Accessory power output
2.1mm DC connector
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
80W
175W
0.003%
5mV
47kΩ + 100pF
20Hz - 20kHz ± 1dB
80dB
23dB
1V
10kΩ
4.6Vrms
20Hz - 20kHz ± 0.2dB
105dB
735mV
230Ω
5V
1Ω
16Ω - 2kΩ
6V, 500mA
110-120V or 220-240V
500W
433 x 275 x 85mm
9.2kg
11.1kg
Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E-14
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.