Channel Number Setting; Operational Hints - Toa WM-5225 Manual De Instrucciones

8. CHANNEL NUMBER SETTING

Step 1. Switch off the power. Rotate the microphone grip
counterclockwise to remove it.
Step 2. Using the supplied screwdriver, set the Channel setting
switch pointer to the desired channel number.
Step 3. Replace the microphone grip.
Note: Make sure that the wireless microphone is identical to
the wireless tuner in the channel number. Should the
microphone's setting differ from that of the tuner, the
tuner does not receive the microphone signal.
9. OPERATION
Step 1. Confi rm that the wireless microphone and the wireless tuner are identical in the channel number. If not
identical, turn the power ON/OFF switch to the OFF position, then set the channel number to the same
channel number as the tuner.
Step 2. Turn the Power ON/OFF switch to the ON position. Then, confi rm the green LED of the Power/Battery
lamps will light.
Step 3. Turn the Power ON/OFF switch to the OFF position after use.

10. OPERATIONAL HINTS

• The microphone's service distance is 3 – 120 m. When the microphone user moves in a facility, signal
dropouts (momentary losses of signal reception) may be encountered. These dropouts are caused by the
building's architectural designs or materials which block the travel of or refl ect the radio signal. If this occurs,
the user needs to change locations for better signal reception.
• The proper operation of your wireless system may be interfered with by other system operating on the same
frequency. In such cases, change the operating frequency of your system. (As to dealing with the interference,
refer to the operating instructions of the wireless tuner.)
• Should you have any questions regarding the use or availability of TOA wireless products, please contact
your local TOA dealer.
6
BANK CHANNEL
7 8 9 A
4
6
5 B
3
4 C
2
3 D
2
E
1
1
F
0
Channel selector switch