Led Indicators; Connectors And Buttons - Axis P55-E Serie Guia De Instalacion

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red

Connectors and Buttons

For specifications and operating conditions, see page 12.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NO TICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer's instructions. For
information about regulatory requirements, see Electromagnetic Compatibility (EMC) on
page 2 .
Control Button
For location of the control button, see Hardware Overview on page 9 .
The control button is used for:
• Resetting the product to factory default settings. See page 17.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Restart Button
Press the restart button to restart the product.
AXIS P55-E Network Camera Series
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after
startup completed.
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable or lost.
11