Steamfast SF-623 Guia Del Usuario página 3

10. Do not use unit where aerosol-based products are being used, or where oxygen is being
administered.
11. Unit is only meant to be used with recommended Mid-Size Fabric Steam Press (model SF-623)
accessories. Using other types of attachments may cause damage to unit or injury.
12. If Lighted On/Off Switch does not illuminate when unit is plugged in and switch is set to "On"
(I) position, unit is not operating normally. Immediately disconnect cord from power
supply, then refer to troubleshooting guide on page 9 of this manual for assistance.
13. Do not attempt to use unit without properly filling with water.
14. When filling unit, only water should be used – other cleaning agents could damage unit or
cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize
potential build-up of mineral deposits.
15. To reduce risk of contact with hot water emitting from Pressing Plate, check appliance before
each use by positioning it away from body and turning it on. Do not operate unit if Pressing
Plate is blocked.
16. Burns can occur from touching hot parts, hot water, or steam. Do not touch Pressing Plate or
attempt to connect any accessories while unit is in use. Use caution when you turn unit
upside-down – there may be hot water inside.
17. When steaming any fabric for the first time, it is recommended that you consult the
manufacturer's guidelines for the fabric being steamed. For items in question, test on an
inconspicuous area before proceeding.
18. Do not allow power cord to touch hot surfaces during use. Loop cord loosely around appli-
ance when storing.
19. Always allow Mid-Size Fabric Steam Press to cool (at least 30 minutes for complete cooling)
and empty Water Reservoir before storing.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
Questions or comments?
•
www.steamfast.com
•
[email protected]
•
1-800-711-6617
Speak your mind! We invite you to review this product online:
www.steamfast.com/reviews
ENGLISH | 3