Panasonic Strada CN-GP50N Información Importante página 13

Notes on Lithium Ion Battery
l The battery is not sufficiently charged when you
purchase the unit. Be sure to charge the battery
prior to using the unit for the first time.
l Once the battery is charged, you can use the
unit continuously for approximately 4 hours.
l There is no need to fully discharge the battery
before charging. You can charge the battery
before it is discharged.
l Recharging will not commence if internal
temperature of the battery is outside of
allowable temperature range (10 ˚C to 5 ˚C)
l The life of the battery can be assumed to be
over when usage time becomes extremely
short despite the battery being charged
correctly. (Estimated number of charges:
Approximately 00 times)
In such a case, consult the dealer.
l If you will not use the unit for a long period of
time, be sure to fully charge the battery at least
once every two weeks. Over discharge of the
battery can affect the charging performance.
Notes on Cigarette Lighter Adapter
l For a vehicle in which the power supply of the
cigarette lighter is not turned off when ACC of the
vehicle is set to the OFF position, disconnect the
cigarette lighter adapter when not using the unit.
Failure to do so may cause the battery to go flat.
Notes on AC Charger
l The unit consumes approximately 0.5 W of
power while turned off.
If you will not use the unit for a long period
of time, we recommend removing the power
plug from the outlet in order to save power.
l Be careful that no metal objects enter inside
the AC plug adapter. Otherwise, a short may
result in a malfunction.
Notes on SD Memory Card
The unit supports SD Memory Cards of up to
 GB. Cards of 4 GB or above (SDHC memory
card) cannot be used, because the standard is
different.
Observe the following cautions in order to
prevent damage to data or an SD Memory Card,
or a malfunction of the unit.
(Panasonic assumes no responsibility whatsoever
for damage resulting from loss of data.)
l Do not turn off the power of the unit while
writing data to an SD Memory Card.
Do not touch the contacts on the back of an
l
SD Memory Card with a hand or metal object,
or allow them to get dirty.
l Do not remove the label affixed to an SD
Memory Card.
l Do not affix a sticker or label on top of another
one.
l Do not subject an SD Memory Card to a
strong impact, or bend, drop, expose it to
water, etc.
Notes:
l An SD Memory Card may become hot after it
is used for a long period of time, but this does
not indicate a malfunction.
A card has a limited life. Operations such as writing
l
and deleting may become no longer possible after
the card is used over a long period.
l An SD Memory Card may not work properly if
it is defective.
l The recommended product number may
change without notice.
l When an SD Memory Card is not working
properly, remove and re-insert the SD
Memory Card.
l When you want to use a mini SD card or
micro SD card with the unit, be sure to attach
the dedicated adapter (supplied with the mini
SD card or micro SD card).
Make sure the adapter is ejected and inserted
together with the card to ensure just the
adapter is not left inside the unit.
 List of supported SD Memory Cards
SD Memory Card (Recommended Product)
Capacity Product Number
51MB RP-SDR51E1A
1GB RP-SDR01GE1A
1GB RP-SDV01GE1A
GB RP-SDM0GE1A
GB RP-SDV0GE1A
13
(As of August 00)
1