Instrument Components; Zoom3D - GeoMax Zoom3D Manual De Usuario

2.3

Instrument Components

2.3.1

Zoom3D

Motor-driven Part
Battery Socket
LEDs and Buttons
LDM Laser
Description of the System
a c
b
c
010735_001
a b c d e b
010736_001
Button/LEDs
ON/OFF button
010732_001
LEDs for Zoom3D status
010731_001
LED for battery status
010733_001
Status of Laser Beam
OFF
ON
Flashing
010734_001
d
e
c
f
a) LEDs for Zoom3D status
b) ON/OFF button
c) Grips to hold the instrument
g d) Infrared (IR) interface
e) WLAN interface
f) Laser distance meter with Pointfinder
g) Circular bubble
a) Tripod thread 5/8"
b) 90° marking
c) Power supply connector for Zoom3D
d) LED for battery status
e) Data cable connector
Description
Button to turn instrument ON or OFF.
Instrument turns OFF after 15 minutes if not connected to the PC.
• Green and orange LEDs light up continuously: Zoom3D is booting.
• Orange LED flashes: Self-levelling procedure is running or tilt > 3°.
• Green LED flashes: Zoom3D is ready for measurement. Tilt sensor
is on.
• Orange LED lights up continuously: An error occurred.
• Green and orange LEDs light up continuously: Press the ON button
to reset the instrument.
For experts only:
Green LED flashes once; orange LED flashes three times: Tilt sensor is
off.
If instrument is on and connected to the charger:
• Green LED flashes 1x: Battery is charged to 25%.
• Green LED flashes 2x: Battery is charged to 50%.
• Green LED flashes 3x: Battery is charged to 75%.
• Green LED lights up continuously: Battery is fully charged.
Description
Pointfinder is OFF or Zoom3D targets automatically.
Pointfinder is ON or user is targeting by Remote Control.
To indicate the precise position of a projected point.
en
Zoom3D | 11