Connecting To An Amplifier; Accessory Audio/Video (A/V) Connections; Remote Control Batteries - Insignia NS-1DVDR Guía Del Usario

To connect to your TV with a component
video cable:
• Connect the COMPONENT OUTPUT jacks
on your recorder to the corresponding in
jacks on the TV using an optional Y Pb Pr
cable.
Notes
• Progressive Scan does not work with the
Audio/Video or S-Video connections.
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled.
Audio connection
To connect to your TV with audio source:
• Connect the Left and Right AUDIO OUT
jacks on the back of your recorder to the
audio left and right in jacks on the TV using
the supplied audio cables.

Connecting to an amplifier

Back of recorder
Digital
coaxial
cable
COAXIAL
DIGITAL INPUT
Back of amplifier or receiver
To connect two-channel analog stereo or
Dolby Pro Logic II/Pro Logic:
• Connect the left and right AUDIO OUT (or AV
AUDIO OUT) jacks on your recorder to the
audio left and right in jacks on your amplifier,
receiver, or stereo system using the audio
cables supplied.
To connect a two-channel digital stereo or
A/V receiver with multi-channel decoder:
1 Connect one of your recorder's DIGITAL
AUDIO OUT jack (coaxial) to the
corresponding in jack on your amplifier. Use
an optional digital (coaxial) audio cable.
2 Activate your recorder's digital output. (See
"Audio Settings" on page 11).
8
Audio
cable
L R
AUDIO INPUT
www.insignia-products.com
Digital multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this you need a
multi-channel audio/video receiver that supports
one or more of the audio formats supported by
your recorder, including MPEG 2, Dolby Digital,
and DTS. Check the receiver manual and the
logos on the front of the receiver to verify this.
Note
• Due to the DTS Licensing agreement, the
digital output will be in DTS digital out when
DTS audio stream is selected.
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
• To play six-channel digital surround sound
though a digital connection, your receiver must
have a Digital Multi-channel decoder.
• To see the audio format of the current DVD
displayed on the screen, press AUDIO.
• Your recorder does not perform internal
(2-channel) decoding of a DTS sound track. To
enjoy DTS multi-channel surround, you must
connect your recorder to a DTS compatible
receiver through one of your recorder's digital
audio outputs.
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are trademarks
of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital
Theater Systems, Inc.

Accessory audio/video (A/V) connections

Jack panel of component
or
Back of recorder
To connect your recorder to an accessory
component:
• Connect the AV IN 1 or AV IN 2 jacks on your
recorder to the audio/video out jacks on your
accessory component, such as a VCR, using
the optional audio/video cables.

Remote control batteries

The remote control requires two AAA batteries.
We recommend that you replace the batteries on
a yearly basis or when the operation of the
remote control becomes intermittent or
unsatisfactory. Replace the original batteries
with new AAA batteries. Do not mix old and new
batteries or different types of batteries.
Front of recorder