Koblenz Electrica AI-1220 Manual De Operación página 5

MODELS AI-1220, AI-1220-P, AI-1230, AI-1230-P
1. Insert the hose aligning the three tabs with the grooves in the suction inlet. Push coupling and turn clockwise.
2. On the other end of the hose (metal elbow) connect the two metal wands an the aluminum elbow.
3. Connect the accessory of your choice to the elbow or directly to the wand.
MODELS AI-1260, AI-1260-P, AI-1660, AI-1660-P, AI-1960 and AI-1960-P
1. Press the plastic coupling of the hose into the suction inlet tube.
2. Press the other end of the hose into the upper extension wands (the one without coupling ring).
3. Join the wands aligning the button and the hole.
4. To connect the accessories, loosen the ring (do not take it off) and insert the accessory of your choice. Tighten up the ring again.
5. The crevice tool, the furniture and upholstery brush, and the dust brush can be connected directly into the hose.
AI-1260, AI-1260-P,
AI-1660, AI-1660-P,
AI-1960 and AI-1960-P
MODELS AI-1240
This model includes an expandible chromed wand.
Connect the hose to the wand then connect any floor accessory or tool required
CONNECTING HOSE AND ACCESSORIES
COUPING
HOSE
COUPING
TOP WAND
SECURITY BUTTON
BOTTOM WAND
RING
ACCESSORY
COUPING
HOSE
METAL ELBOW
STRAIGHT WAND
ACCESSORY
-5-
AI-1220, AI-1220-P,
AI-1230, AI-1230-P and AI-1240