Buffalo GH160 Manual De Instrucciones página 4

UK
Fitting the Element and Control Box to the Body
Place the Element/Control Box into the right and left support bracket at the rear of the Pasta Cooker
body, then press the spring pin at the right of the box to position the Element/Control Box into the pan.
The Pasta Cooker can now be filled with water.
Connect the Pasta Cooker to the correct power supply and it is ready to operate.
Caution: Do not position and operate the Pasta Cooker near combustible or flammable, materials or
objects.
Operation
1. Turn the thermostat dial towards the "ON" position, the amber light will activate to confirm, adjust
the dial to the required temperature setting.
2. Allow time for the water temperature to reach the required setting. While the water is heating, the
red light will be on, when the water has reached the required temperature; the red light will switch
off.
3. As the water temperature fluctuates, the thermostat will operate to maintain the set temperature,
the indicator light will be lit when the Pasta Cooker is heating the water.