EN•ENGLISH
• IMPORTANT: read the instructions carefully
before use. Save the instructions for future
reference.
• PEG PEREGO reserves the right to make any
necessary changes or improvements to the
products shown at any time without notice.
CUSTOMER SERVICE
If parts of the model are accidentally lost or
damaged, use only original Peg Perego spare
parts. Contact the Peg Perego Customer
Service for all repair work, replacements,
information about products, and sale of
original spare parts and accessories, at the
following:
USA:
tel.: 800.671.1701
fax: 260.471.6332
Call us toll free: 1.800.671.1701
CANADA:
tel.: 905.839.3371
fax: 905.839.9542
Call us toll free: 1.800.661.5050
www.pegperego.com
INSTRUCTIONS FOR USE
FRAME OPENING
1• Release the handlebar pushing the clips
inwards.
2• Raise the handlebar in the direction
shown by the arrow and lock it when it
clicks home.
FRAME ASSEMBLY
3• Remove the pipe protecting caps and
insert the rear wheel unit till it clicks
home, as shown in the figure.
4• To assemble the front wheels, pull down
the lever A and then insert the wheel as
shown in the figure, until its click.
SWIVELLING WHEELS
5• To make the front wheels swivel, pull
down the lever as shown in the figure. To
fix them, pull the lever in the opposite
direction.
BRAKE
6• To brake the frame, push down the rear-
wheel bar with the foot. To release the
brakes, do the opposite.
TO FOLD THE STROLLER
Apply the brake and remove the seats as
follows.
7• Before closing the frame, swivel the
wheels and move them forward.
8• To close the chassis, press the button on
the handle as you rotate the handle in the
direction of the arrow;
9• release the handle, using your foot for
the safety lever as in the figure.
10• Lower the handlebar till you hear the final
click. Check that the frame is correctly
closed paying attention to the safety
hooks position.
GANCIOMATIC SYSTEM
Thanks to the G-matic System, with one easy
gesture you can hook three Elegante carrying
seats to the Triplette chassis. Follow the
loading instructions listed below.
11• For information on mounting and
releasing the product, consult the
carrying seat manual.
Figures A and B show the possible ways
of mounting the carrying seats.
LOADING AND UNLOADING SEQUENCE
12• First mount the carrying seats on the
Triplette chassis, then place the child in
the middle carrying seat first, the second
one in the front seat (away from the
handle) and lastly, the child in the rear
carrying seat (near the handle).
13• To unload the children, reverse this order,
i.e. first the child in the rear seat (near
the handle), then the one in the front seat
(away from the handle) and lastly, the
child in the middle carrying seat.
N:B: On the Tripletʼs chassis:
• If the seats are positioned as in Figure
A, the only seat where backrest can be
reclined is the front one (fartest from the
handle); it is possibile to recline the other
backrests by removing the front bars of
the front and central seats.
• If the seats are positioned as in Figure
B the only seat where backrest can be
reclined is the back one (closest to the
handle); it is possibile to recline the other
backrests by removing the front bars of
the back and central seats.
CLEANING & MAINTENANCE
Your product requires only minimal
maintenance. Cleaning and maintenance
operations must be performed only by adults.
• Be sure to keep all moving parts clean,
lubricating them with light oil if necessary.
• Dry off metal parts to prevent rusting.
• Regularly clean the plastic parts with a
damp cloth. Do not use solvents or similar
products.
• Remove any dust and sand from the wheels.
• Protect the product against smog, water,
