Kohler K-702200 Guía De Instalación Y Cuidado página 19

Install the Inside Panel
CAUTION: Risk of product damage. For the protection of your bath unit, use a
drop cloth or similar material as a protective cover during these steps.
From outside of the shower, install the inside panel first. Position the panel with
the rollers toward the inside of the shower.
Carefully lift the inside panel up inside the top track and hang the rollers on the
inside rail.
Roll the panel back and forth along the track to make sure it operates smoothly.
Align the panel with the showerhead side wall jamb.
If the panel does not operate smoothly, adjustment may be needed. If adjustment
is needed, remove the panel.
NOTE: Moving the rollers to the top hole of the hanger brackets will cause the glass
to hang lower. Moving the rollers to the bottom hole of the hanging brackets will
cause the glass to hang higher.
Loosen the roller screw(s) and move the roller to another hole in the hanging
bracket. Insert and tighten the screw(s) and rehang the panel.
Kohler Co.
Inside Panel
Panneau intérieur
Panel interior
19 1063221-2-A