D-Link DKVM-4U Guia De Instalacion página 2

Check Your Package Contents
DKVM-4U USB KVM Switch
Installing the DKVM-4U
The DKVM-4U is a hot-swappable KVM switch. You do not need to turn your
computers off before installing the Device.
A. B.
Attach your
computer's
USB keyboard
connector to
the DKVM-4U
USB keyboard
port.
The following steps below apply to each computer that you are using with your DKVM-4U.
Installation of the DKVM-4U is now complete.
Quick Installation Guide
DKVM-4U
4-PORT USB KVM SWITCH
Quick Installation Guide
C.
Attach your Attach your
computer's monitor's HDDB
USB mouse 15 VGA
connector to connector to the
the DKVM-4U VGA port of the
USB mouse DKVM-4U.
port.
F.
Using the connectors on
the other end of the
included KVM cables that
you connected to the
DKVM-4U in the previous
section, attach the VGA
connector to the VGA port
located on the back of
your computer case.
2 sets 2 in 1 USB KVM Cable
D.
Using the
included KVM
cable, attach
the USB B type
connector to
the DKVM-4U.
1
in 6ft
E.
Using the
included KVM
cable, attach the
VGA connector
to the VGA port
of the DKVM-4U.
G.
Attach the USB A
type connector to an
available USB port
located on the back
of your computer
case.