For your child' s safety, please read the following carefully:
• Check the 5-points harness system is correctly set-up. (Comfort, tightness)
• Check the shoulder straps and the height of the headrest, it should be on or slightly higher than your child' s
shoulder.• Check the safety seat is rmly and correctly xed to the vehicle, adjust if necessary.
• Check your vehicle belt periodically. Maintenance if any damage.
• If there is some problems when you x it, please write down the product model, then contact us in time. Our
sta will answer your questions.
I. PLEASE USE THE 3-POINT SEATBELT
II.KNOWING YOUR CHILD SAFETY SEATS
1. Puller; 2. Headrest; 3. Shoulder pad; 4. Safety belt; 5. Safety buckle; 6. Buckle pad; 7. Retractor belt; 8.
ISOFIX puller; 9. Backrest adjuster puller; 10. Base; 11. Insert; 12. Seat cover; 13. Backrest; 14. Slot; 15.
3-Jaw bar; 16. ISOFIX connector; 17. Latch; 18. Slot;19. Seat belt guide-bar;
20. Safety belt guider; 21. 3-Jaw bar;
III. ADJUST CHILD SAFATY SEATS.
IV. THE INSTALLATION AS GROUP 0+(0-13KG).
V. THE INSTALLATION AS GROUP I(9-18KG).
VI. INSTALLATION OF ISOFIX.
VII. INSTALLATION OF LATCH
VIII. THE INSTALLATION AS GROUP II,III (15-36KG).
IX.REMOVAL AND INSTALLATION OF THE SEAT COVER.
X. INSTALLATION INSTRUCTIONS
SEAT MAINTENANCE
- Seat cover is most important part of the seat, and should be maintained properly. It cannot be cut, and should
be away from the reworks and corrosive chemicals.
- When there is a need to change the cover, please go to the manufacturer for the replacement cover, not from
other channels or its designated.
DO NOT use the child safety seats without the seat cover!
- If the seat of the seat is with a slight smudgy, it can be cleaned with the sponges with soap water. DO NOT use
strong acid or alkaline detergent and cleaning agent.
- This seat cover is hand-wash only with the soap water at temperature 30 Celsius degrees. It is normal for slightly
rub o . Do not rinse, do not iron dye, do not machine wash, do not twist, make it natural dry.
ENGLISH