Tabla de contenido
Idiomas disponibles
Idiomas disponibles
attachment clockwise.
10. Wait until the blades has completely stopped before removing the blender attachment
from the motor base.
11. Pour the blended ingredients into a separate storage container or supplied mugs.
12. Unplug the appliance when not in use and before cleaning.
Warning: When blending warm liquid, unscrew the blender attachment lid slowly in order
to release any pressure that may have built up during the blending process.
Using the Blender Cups/Mugs
1.
Place the motor base on a flat, stable surface.
2.
Select a cup/mug.
• The appliance comes with 2 blender cups.
• Remove the coloured comfort ring from the mug before using the mug.
3.
Chop the ingredients to be blended into small pieces and then place them into the
cup/mug.
• Warning: Never operate the appliance when the cup/mug is empty.
• Warning: If blending liquid, it is recommended to use a large blender cup. Do not fill
the cup/mug to more than ¾ of the capacity.
4.
Select the required flat or cross blade attachment and twist the cup/mug onto blade
attachment until the blade attachment and cup/mug have a tight seal.
5.
Invert and fasten the cup/mug assembly onto the motor base by turning the cup/mug
assembly anticlockwise.
• Make sure that the three tabs on the outside of the cup/mug are aligned with the
three grooves on the inner edge of the motor base.
6.
Plug in and switch on the appliance.
7.
Once the ingredients have been blended to the desired consistency, turn the cup/mug
assembly clockwise.
8.
Wait until the blades have completely stopped before removing the cup/mug assembly
from the motor base.
9.
Invert the cup/mug assembly. Hold the cup/mug firmly in one hand. Use the other
hand to turn the blade attachment anticlockwise and remove the blade attachment
from the cup/mug.
Warning: When blending warm liquid, cover the cup/mug with a cloth or towel and
unscrew it slowly in order to release any pressure that may have built up during the
blending process.
This product comes with two shaker lids that can be used as shaker tops. The shaker lid
with the large holes is for coarse ingredients such as Parmesan cheese and the shaker lid
with small holes is for finely ground spices such as cinnamon or nutmeg.
6
Tabla de contenido
