C/L; Pump System Tubing Flow Rates - Masterflex C/L 77120-32 Manual De Operación

APPENDIX A
CAUTION: Tubing for use with the MASTERFLEX
Use of tubing other than that specified will result in poor pumping performance and/or
pump system damage and voiding of applicable warranty.
Available Microbore Autoanalysis Tubing
TYGON — Catalog prefix number 06460-XX available
in sizes 10 through 48.
TYGON E-LFL — Catalog prefix number 06449-XX available
in sizes -10 ,-12, -18, -26, -30, -34, -42 and -48.
Silicone (peroxide-cured) — Catalog prefix number
07625-XX available in sizes 22 through 48.
Silicone (platinum-cured) — Catalog prefix number
95590-XX available in sizes 18 through 48.
®
PHARMED BPT — Catalog prefix number 95809-XX
available in sizes -12, -18, -26, -32, -36, -40, -44 and -48.
®
VITON fluoroelastomer — Catalog prefix number
97632-XX available in sizes -26, -30, -34, -38, -42, -46 and -48.
®
C-Flex — Catalog prefix number 95718-XX available in
sizes-10 through 48.
Solvent/Hydrocarbon – Catalog prefix number 95712-XX
available in sizes 10 through 48.
See the following table for Tubing size versus ID and
flow rates. Flow rates are for water pumped at room
temperature and 0 psi. Flow rates for silicone tubing
are approximately 25%–50% less than listed.
Flow rate is determined by drive, speed, tubing size
and material.
Printed in U.S.A.
10
®
® ®

C/L

Pump Systems is Microbore Autoanalysis Tubing.
Tubing Tubing
Suffix. ID
in (mm)
-10 0.008 (0.19)
-12 0.010 (0.25)
-14 0.015 (0.38)
-16 0.017 (0.44)
-18 0.020 (0.51)
-22 0.025 (0.64)
-24 0.030 (0.76)
-26 0.035 (0.89)
-28 0.040 (1.02)
-30 0.045 (1.14)
-32 0.051 (1.30)
-34 0.056 (1.42)
-36 0.060 (1.52)
-38 0.065 (1.65)
-40 0.073 (1.85)
-42 0.081 (2.06)
-44 0.090 (2.29)
-46 0.100 (2.54)
-48 0.110 (2.79)
All flow rates based on pumping water @ 0 psig 70°F (21°C).
Flow Rate
60 rpm 6 rpm
(µL/min) (µL/min)
128 13
178 17
378 45
490 55
698 70
1110 105
1580 150
2110 205
2680 270
3290 335
4130 420
4900 495
5510 555
6330 630
7650 750
8910 875
10160 1015
11340 1170
12340 1330