Using The Wine Chamber; Energy Saving Tips - Waeco MyFridge MF-6W Instrucciones De Uso

_MF-6W.book Seite 14 Dienstag, 11. April 2006 9:25 09

Using the wine chamber

The wine chamber has the following buttons:
No. in 1,
Description
page 3
1 POWER
2 LIGHT
3 TEMP –
4 TEMP +
Note
You can switch the temperature display between Celsius and
Fahrenheit. To do this, press the TEMP + and TEMP - buttons
simultaneously for three seconds.
6 Using the wine chamber
Before you switch on your new wine chamber for the first time,
you should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the the "Cleaning and
maintenance" chapter on page 16).
6.1

Energy saving tips

Select a well-ventilated location for the device.
Do not open the wine chamber more often than necessary.
Do not leave the door open for longer than necessary.
6.2 Connecting the wine chamber
Danger of fatal injuries!
Never handle plugs and switches if you have wet hands.
➤ Before you start up the device for the first time, verify that the operating
voltage matches the mains voltage (see type plate).
➤ Connect the device as follows:
– With the mains adapter supplied to the 100-240 V AC mains
– With the 12 V lead supplied to a 12 V socket
14
Explanation
Switches the wine chamber on or off.
Switches the interior light on or off.
Decreases the desired cooling temperature
by 1 °C (2 °F).
Increases the desired cooling temperature
by 1 °C (2 °F).
MF-6W