Tabla de contenido
the button
for 2 seconds to start the program with the new cooking settings. Settings adjusted by User overwrite defaults and can be applied next time. Cooking
settings are adjustable during runtime and new values also replace defaults.
Settings of all programs can be restored to factory defaults. Just press and hold
defaults after three beeps. You may also restore factory defaults of one certain program. Just choose the program (but do not start it) and press
NOTICE: the cooking temperature of PILAF
CANCEL AN ACTION
The user can abort any running program or cancel any mode by pressing the button
ENERGY SAVING
Power automatically turns OFF in 30 seconds of down-time. The user can manually turn the power OFF – press and hold the button
the power – press and hold the button
CLEANING AND MAINTENANCE
Always unplug the appliance before cleaning.
Let the appliance cool down completely.
Wash the inner pot by hand using dishwashing liquid, rinse with water, then dry using soft material.
Do not use a dishwasher for cleaning the inner pot.
Do not use chemical and abrasive cleaners for washing the appliance or accessories.
Do not put the inner pot into cold water right after cooking as this may cause damage to the inner coating. Let it cool down first. Do not put very cold products in the pot when it is extremely hot.
CAUTION: do not let water to get inside the housing.
Clean the appliance housing when required using warm water and soft material, do not use any chemical and abrasive cleaners or dish washing detergent.
Clean the steam valve after every cooking session. Detach it carefully. Rinse with running water, dry and set back.
and BREAD
are not adjustable.
for at least 2 seconds.
and
simultaneously when the device is in standby mode. Settings restore to factory
User may only adjust the cooking time of these two programs.
.
41
MT-4315 / MT-4316
and
together.
for at least 5 seconds. To turn ON
Tabla de contenido
