Numark NS7 Guia Del Usuario página 13

42. BPM Meter: This meter is an aid for matching the tempo of both decks. When the white
center LED is lit, the BPMs are matched. Otherwise, the meter will tend towards the faster
deck. The further from center, the greater the difference between the two BPMs.
The meter is also an aid while adjusting Loop In or Loop Out points. If you are making fine
adjustments to your Loop In or Loop Out points using the platters, the lit LED will "wrap
around" the meter. It will rest on the white center LED whenever the loop's length has
been doubled or halved exactly.
Note: The BPM Meter will aid in loop adjustments only if (1) a BPM reading has been
entered for that track and (2) the two Decks' tempos have been synchronized.
Navigation Controls
43. Scroll Knob: Use this knob to scroll through lists of tracks, Crates, etc. in the software.
You can also press it to move between the panels shown in the software.
44. Fwd / Back: These buttons move the selector between various panels in the software.
Press and hold Shift and then press Fwd to sort the current Library/Crate/Panel View by
album. Press and hold Shift and then press Back to sort the current Library/Crate/Panel
View by track number.
45. Crates: Press this to move the selector to the Crates Panel in the software. Press and hold
Shift and then press this button to sort the current Library/Crate/Panel View by song.
46. Prepare: Press this to move the selector to the Prepare Panel in the software. Press and
hold Shift and then press this button to sort the current Library/Crate/Panel View by artist.
47. Files: Press this to move the selector to the Files Panel in the software. Press and hold
Shift and then press this button to sort the current Library/Crate/Panel View by BPM.
48. Load A / Load B: Press one of these buttons while a track is selected to assign it to Deck
A or Deck B, respectively.
49. Load Prepare: Press this to add a selected track to the list of tracks in the Prepare Panel
in the software.
50. Panel / View: Press this to toggle through the Recording (Rec), Effects (FX), and Sampler
(SP-6) panels. Press and hold Shift and then press this button to toggle through the
available software display modes (e.g., Vertical, Horizontal, Extended, Library).
13