Lumme LU-1445 Manual De Instrucciones página 25

OPERATION
Press MENU button МЕНЮ/ОК, the very first program in the programs list is SMART, symbol
go on touching or navigation buttons to choose necessary program. Touch the START button СТАРТ/АВТОПОДОГРЕВ
cooking time countdown will start displaying till the end of the program.
Don't leave working cooker with empty pot!
Once a program is chosen display shows its default coking settings (temperature and cooking time). You may adjust default cooking settings of any program but EXPRESS. Cooking
settings can be adjusted before start of the program or while program is running. All changes applied by User store saved in memory of device until reset to defaults.
NOTICE: cooking time countdown starts instantly but for few programs (FRY, STEAM, BROTH, PASTA and DEEP FRY) countdown starts only once temperature reaches up to
working value. While cooker is heating up display shows dynamic image
NOTICE: There is no cooking time countdown while EXPRESS program running. Program terminates once water in pot boiled away to dry.
Once program is complete device automatically goes into keep warm mode after sound beep. Bcklight of keep warm indicator
OFF keep warm option while program is running or after the end of the program by long press of the
OPERATION IN THE 8-LEVEL PROGRAM «SMART»
Press MENU button МЕНЮ/ОК, SMART, symbol
flashing That means you entered the first phasw of the program and may enter cooking settings as you wish. Press TIME ВРЕМЯ
program. Hours indicator starts flashing; set value which you need by
which you need by or buttons. Interval – 1 minute. Then press TEMPERATURE/ТЕМПЕРАТУРА
or buttons. Interval – 1 degree. To avoid multiple touching buttons
MENU МЕНЮ/ОК button to confirm entered settings of first stage of the SMART program; digit 1 under the SMART program indicator will change to 2
temperature settings for the second stage of the SMART program as described for stage 1. You may set and save up to 8 stages with your own settings of cooking time and temperature.
When you entered and saved settings of as many stages as you need, press START
All of stages which have nil values of cooking time and temperature settings are not executable. All of settings which you changed keep in memory of device and become default until
changed again. If User applied any changes in settings of any stage (or number of stages) but program wasn't started and User canceled SMART program by touch of the CANCEL
instead of cooking time countdown.
starts flashing on display. Press MENU button
or buttons. Interval – 1 hour. Press TIME ВРЕМЯ
and hold it pressed when you need to change value up to much bigger or down to smaller one. Press
СТАРТ/АВТОПОДОГРЕВ button. SMART will execute as many stages as programmed by User.
25
starts flashing on display. If you are not going to use SMART program right now;
to start program. Program starts after sound beep and
ПОДОГРЕВ/ОТМЕНА turns ON. User may turn ON and
СТАРТ/АВТОПОДОГРЕВ button.
МЕНЮ/ОК again; 1 digit under the SMART program indicator starts
button to set time of first stage of the SMART
button again; minutes indicator starts flashing. Set value
button to set cooking temperature of the first stage of the SMART program by
LU-1445/1447
. Enter cooking time and