Safety Notes; Installation Instructions; Technical Data; Flow Diagram - Hansgrohe AXOR Montreux 16540 Serie Instrucciones De Montaje

6

Safety Notes

6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal pressu-
res.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms.
• Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous
flow heaters if the flow pressure is at least 0,15 MPa.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G 1/2:
anti-pollution function
Fault
Insufficient water
Instantaneous heater didn't work
4
English
Symbol description
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
170 ±44 mm
cold right - hot left
Cause
- Shower filter seal dirty
- Non return valve hasn't moved
back
- Flow limiter in handshower isn't
removed
- Filters are dirty
- Non return valve hasn't moved
back
Assembly see page 31
Maintenance (see page 35)
The non return valves must be checked
regularly according to DIN EN 1717
in accordance with national or regional
regulations (at least once a year).
Do not use silicone containing acetic acid!
Dimensions (see page 32)

Flow diagram

(see page 32)
Spare parts (see page 33)
XXX = Colors
000 chrome plated
820 brushed nickel
830 polished nickel
Operation (see page 34)
Cleaning (see enclosed brochure)
Test certificate (see page 36)
Remedy
- Clean filter seal between shower
and hose
- Exchange non return valves
- Remove flow limiter
- Clean the filter / exchange filter
- Exchange non return valves