MRA R1200GS Adventure Instrucciones De Montaje página 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
2 Bowl screws black, M5x16mm
2 Plastic washers 12x5x0,5mm
2 Washers 30x17x2mm
2 Flange sleeve (only R1200GS Adventure -
see instructions R1200GS)
Installation instructions for Adventure equipment
1. First, remove the original screen's bracket, which you will no longer need (P1).
2. You will need R1200GS coverings and locking discs (original BMW parts and
accessories) to mount your MRA screen (P2).
Parts list
Quantity Part No.
1 46 63 7 673 913 Covering left
1 46 63 7 673 914 Covering right
1 46 63 7 707 221 Locking disc left
1 46 63 7 707 222 Locking disc right
3. Watch out for the "left" and "right" designations in the name.
4. The screen comes with shorter aluminium sleeves included.
5. Now proceed according to the R1200GS installation instructions.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: [email protected]
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
Name
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
BMW R1200GS Adventure -2013
Article No..
---
10554
10635
10674
10993
3
Required tools